The 6 Series E24 Forum

Euro Bumpers for sale - jklnhyde 2007-06-29 08:41:05 (790 views)
- Re: Euro Bumpers for sale - krobertk 2009-07-14 20:25:34 (27 views)
- Re: Euro Bumpers for sale - krobertk 2009-06-06 13:00:04 (36 views)
- Re: Euro Bumpers for sale - kangrga 2008-01-05 01:06:18 (343 views)

e24 euro M6 computer problem - christiaanh 2008-01-01 14:31:12 (481 views)
- Re: e24 euro M6 computer problem - keithtayloronline 2008-01-26 14:55:31 (395 views)
- Re: e24 euro M6 computer problem - Doug 2008-01-03 12:02:34 (375 views)
  - Re: e24 euro M6 computer problem - jaguilo 2009-05-07 21:47:21 (58 views)
  - Re: e24 euro M6 computer problem - christiaanh 2008-02-10 16:32:10 (379 views)
  - Re: e24 euro M6 computer problem - christiaanh 2008-02-04 22:56:29 (348 views)
  - Re: e24 euro M6 computer problem - christiaanh 2008-01-03 12:22:28 (353 views)
    - Re: e24 euro M6 computer problem - Doug 2008-01-03 12:51:57 (387 views)
      - Re: e24 euro M6 computer problem - christiaanh 2008-02-10 23:19:04 (356 views)
        
        Re: e24 euro M6 computer problem - Doug 2008-02-17 14:53:14 (354 views)

Interior Color Question - Keith in VA 2007-11-12 09:52:33 (450 views)
- e23- 5 speed (pic) - ky7s 2008-01-08 14:52:42 (524 views)

SouthEast Shark Fest in April in Winston-Salem. (url) - bmw635 2007-12-29 04:06:03 (426 views)

aluminum radiator - madmaxmx 2007-12-27 12:06:23 (386 views)

745i swap..... - rod635csi 2007-12-16 13:30:47 (476 views)
- M30 motor is totally different than the M103 motor- I don't think it has oil - bmw635 2007-12-17 16:29:47 (463 views)

HELP!!! (pic) - brmicbman 2007-11-07 20:50:59 (699 views)
- Reference Sensors - Mounted at Flywheel (nt) - Ken Mc Lean - 85 635CSi 2007-12-17 14:44:33 (511 views)
- try switching connecters on your 2 cps's (nt) - dr750 2007-11-18 11:15:08 (487 views)
- Start here: (url) - bmw635 2007-11-08 00:02:25 (520 views)
  - Getting gas. - brmicbman 2007-11-08 01:10:51 (444 views)
    - Turnt he relay upside down to see the pn# then use a wire to jumper the socket - bmw635 2007-11-08 11:14:53 (493 views)
      - Re: Turnt he relay upside down to see the pn# then use a wire to jumper the socket - brmicbman 2007-11-08 12:45:37 (486 views)
        
        Check coil, dist cap as well.Does gas flow from pump or pressure when key is on? (nt) - bmw635 2007-11-08 19:50:09 (496 views)

WTB: 1988+ U.S. Drivers side Ellipsoid Headlight - ///ARINUTS... 2007-07-30 23:29:38 (421 views)
- Re: WTB: 1988+ U.S. Drivers side Ellipsoid Headlight - ///ARINUTS... 2007-12-14 22:21:06 (297 views)
  - Try Ebay. (nt) - bmw635 2007-12-15 03:18:13 (300 views)

E24 M635 with 400 hp S62 engine. (url) - bmw635 2007-12-14 02:35:07 (773 views)

camshaft in m106 ? - jarni2 2007-11-30 12:08:06 (400 views)
- Ask E23 forum as the 745 has that engine. (nt) - bmw635 2007-12-03 02:28:36 (458 views)

BimmerBoard License Plate Frames. $10 includes shipping. (url) - visionbmw7 2007-11-17 17:51:03 (465 views)
- Re: BimmerBoard License Plate Frames. $10 includes shipping. - downernsp 2007-11-29 16:37:22 (355 views)
  - Send him an email- he's tallying the count. Once ready, you'll make payment so - bmw635 2007-11-30 00:51:10 (362 views)
    - Re: Send him an email- he's tallying the count. Once ready, you'll make payment so - downernsp 2007-12-01 21:56:05 (392 views)

88 635 csi implant - 2800csim5 2007-11-19 16:57:00 (503 views)
- Check FirstFives.org? E12 engine transplant should be the same as E3. Couple guy - bmw635 2007-11-20 15:42:44 (670 views)
- It picks up signal from speed and crank sensor on the trans bell housing. - bmw635 2007-11-20 02:37:51 (407 views)
  - Re: It picks up signal from speed and crank sensor on the trans bell housing. - 2800csim5 2007-11-20 11:31:45 (426 views)
    - I had an 89 635 and has a 92 3.5L engine manegement, intake, head on top of my (url) - bmw635 2007-11-20 14:14:00 (431 views)
      - .....my 86 Euro 635 'has' a 92 3.5L engine manegement, intake, head on top of (nt) - bmw635 2007-11-20 14:16:09 (439 views)
      - The M90 block & B35 head, intake, DME is in my 86 Euro 635. (nt) - bmw635 2007-11-20 14:15:07 (480 views)
        
        Ok, Got it working - 2800csim5 2007-11-21 17:48:41 (395 views)

anyone looking to part out a 89 635csi? - goms187 2007-10-19 15:03:51 (494 views)
- I'm parting out an '88 635csi - Keith in VA 2007-11-12 09:50:41 (527 views)
- Re: anyone looking to part out a 89 635csi? - winfred 2007-11-04 11:54:18 (450 views)
  - Re: anyone looking to part out a 89 635csi? (pic) - winfred 2007-11-04 21:29:10 (675 views)
    - You converted the round plug to rectagular plug @ dist box? (nt) - bmw635 2007-11-04 23:53:34 (445 views)
      - Re: You converted the round plug to rectagular plug @ dist box? - winfred 2007-11-06 23:12:15 (416 views)
        
        Nice work on the whole car! I used on old connector on the engine harness to - bmw635 2007-11-07 11:49:17 (397 views)
        
        Re: Nice work on the whole car! I used on old connector on the engine harness to - winfred 2007-11-09 23:31:57 (421 views)
- Yes, 88-89 E24 harness is longer. I got an E32 harness for my 86 Euro - bmw635 2007-10-21 21:46:36 (408 views)
- i've got wiring in 85 735i that could be had (nt) - dr750 2007-10-21 19:07:34 (436 views)
  - sorry,i misread,got bale o wires from 89 735i - dr750 2007-10-24 11:39:34 (397 views)

Water Pump - themcewens 2007-11-06 23:00:59 (402 views)
- Autohaus.com. ELAutoparts.com, Egermanparts.com, mesaperformance.com, - bmw635 2007-11-06 23:05:33 (569 views)

highline exterior chrome removal - dougwood1978 2007-11-04 12:44:39 (493 views)

M635 fuse box - fmb 2007-10-28 12:08:30 (414 views)
- I'd guess yes since several have done the conversion and no mention of dist box. (url) - bmw635 2007-10-29 17:38:56 (383 views)

Looking for a good rear leather seat with a/c console - cspargo 2007-10-26 14:33:45 (386 views)

Design evolution & history of the M30 motor over 25 yrs. (url) - bmw635 2007-10-18 01:06:27 (515 views)

BMW Mobile Tradition Online Parts Catalog (url) - shogun 2007-10-17 08:50:10 (675 views)

Gentlemen.....Anyone near Miami seen this car before ? (url) - Bayou Bimmer 2007-10-13 09:10:06 (627 views)
- Go for 88-89, much more attractive exterior and luxurous leather interior. Also - bmw635 2007-10-14 17:57:40 (405 views)
  - My first e23 came with trx's so I'm up on that............... - Bayou Bimmer 2007-10-14 18:46:54 (403 views)
    - 88-89 has 208 hp, 220ftlbs vs pre-87 with 180hp, 190ftlbs. 5spd conversion can - bmw635 2007-10-14 22:00:05 (400 views)
    - I am doing a 5 speed conversion on a '88 'flounder' - sfdon 2007-10-14 20:53:12 (383 views)
      - Just looking Don.......Hey, did you change your cell#? (nt) - Bayou Bimmer 2007-10-15 08:36:39 (403 views)

e23 SI board fits e24? - jarni2 2007-10-12 16:24:35 (397 views)
- Use Relaoem.com for pn# reference to compare. (nt) - bmw635 2007-10-13 03:10:53 (575 views)
  - Re: Use Relaoem.com for pn# reference to compare. - jarni2 2007-10-13 04:17:18 (439 views)
    - Might as well buy a new batteryless SI baord on Ebay. (nt) - bmw635 2007-10-15 00:35:19 (435 views)

Aluminum Flywheel M30 - bimmerboy635 2007-09-17 16:55:31 (538 views)
- Re: Aluminum Flywheel M30 - goms187 2007-10-11 11:41:19 (383 views)
  - Re: Aluminum Flywheel M30 - downernsp 2007-10-14 01:50:39 (329 views)
- Re: Aluminum Flywheel M30 SOLD! - bimmerboy635 2007-10-03 01:20:31 (361 views)
- Re: Aluminum Flywheel M30 - bimmerboy635 2007-09-29 02:17:49 (347 views)
- I have one of these in my '82 and love it. - CUPDGRA 2007-09-18 09:57:16 (396 views)
  - Re: I have one of these in my '82 and love it. - bimmerboy635 2007-09-20 22:25:44 (356 views)
- Re: Aluminum Flywheel M30 - bimmerboy635 2007-09-17 18:21:45 (417 views)
  - any kinda part swap? - dr750 2007-09-23 10:23:44 (369 views)
    - Re: any kinda part swap? - bimmerboy635 2007-09-24 22:25:57 (352 views)

anyone here really familiar with a 1935 grey markey 635, ecu 008? (pic) - euroe24 2007-10-11 02:11:57 (586 views)
- Re: anyone here really familiar with a 1935 grey markey 635, ecu 008? - goms187 2007-10-11 12:41:51 (425 views)
  - Re: anyone here really familiar with a 1935 grey markey 635, ecu 008? - euroe24 2007-10-12 17:32:23 (441 views)
- Re: anyone here really familiar with a 1935 grey markey 635, ecu 008? - euroe24 2007-10-11 02:13:58 (419 views)
- Re: anyone here really familiar with a 1935 grey markey 635, ecu 008? - euroe24 2007-10-11 02:13:55 (409 views)

E24 633 Biturbo from Japan - pics (url) - shogun 2007-10-06 17:15:08 (713 views)
- wow (nt) - goms187 2007-10-11 12:45:48 (454 views)
- Re: E24 633 Biturbo from Japan - pics - downernsp 2007-10-07 22:15:21 (431 views)
- sweet (nt) - dr750 2007-10-07 14:15:29 (449 views)

BMWShops.com - Kaiser 2007-10-09 03:22:15 (422 views)

California Drivers Please Look!!! - nitrophish 2007-10-05 02:03:56 (409 views)

what to do - derhai 2007-10-02 17:00:48 (420 views)
- What specific thing do you need? (nt) - bmw635 2007-10-02 18:42:11 (411 views)
  - Re: What specific thing do you need? - derhai 2007-10-02 20:11:42 (378 views)
    - Read all of this content in the link. (url) - bmw635 2007-10-02 21:34:19 (382 views)

BMW 635 Evolution (url) - bmw635 2007-10-02 00:42:32 (541 views)

overheating - nealtech 2007-09-30 20:56:42 (408 views)
- Sounds likme you need to bleed more air out! Here's how: (url) - bmw635 2007-10-02 00:32:13 (395 views)
- Re: overheating - downernsp 2007-10-01 22:44:34 (385 views)
  - Re: overheating - nealtech 2007-10-01 23:02:34 (338 views)
    - Re: overheating - downernsp 2007-10-01 23:27:55 (335 views)
- Re: overheating - nealtech 2007-09-30 21:53:16 (329 views)
- Re: overheating - nealtech 2007-09-30 21:53:15 (339 views)

Have parts car - Shayne 2007-07-12 17:31:37 (545 views)
- Re: Have parts car - kurtaz 2007-09-26 14:40:15 (300 views)
- hi shayne - dr750 2007-09-23 10:32:38 (328 views)
  - Re: hi shayne - Shayne 2007-09-23 13:00:44 (300 views)

Running hot/Coolant light on? (pic) - mbw635 2007-05-23 18:54:39 (791 views)
- Several things to check.... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-09-18 07:25:37 (409 views)
- Re: Running hot/Coolant light on? - downernsp 2007-06-01 17:35:54 (569 views)
- Re: Running hot/Coolant light on? (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 22:48:54 (650 views)
  - 75 and 71º t-stats are nothing but trouble... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-09-19 07:40:32 (411 views)
- Re: Running hot/Coolant light on? (pic) (url) - cwsixer 2007-05-24 00:37:27 (662 views)
  - great link,thx (nt) - dr750 2007-05-27 08:32:12 (586 views)
- Re: Running hot/Coolant light on? - crovensto 2007-05-23 21:24:09 (619 views)
  - If it's not the gauge do a leak down test for bad head gasket. - bmw635 2007-05-24 00:37:28 (564 views)
    - Thanks - mbw635 2007-05-24 23:13:19 (519 views)
      - Running Hot: Problem Solved - mbw635 2007-09-16 21:03:32 (454 views)
        
        Hmm, too simple for too much headache. :-)) (nt) - bmw635 2007-09-18 01:47:55 (432 views)

Quick door panel question - cspargo 2007-09-18 05:58:19 (382 views)
- Yes. (nt) - bmw635 2007-09-18 16:18:19 (382 views)

e24/635CSi-1987/ Production date 09/1986-Autotran - kjkumar 2007-05-18 13:12:21 (452 views)
- Re: e24/635CSi-1987/ Production date 09/1986-Autotran - cdaley 2007-09-01 04:05:22 (416 views)
- Check for all intake leaks, don't forget couple small hoses under the intake (url) - bmw635 2007-05-22 11:34:26 (432 views)
  - Re: Check for all intake leaks, don't forget couple small hoses under the intake - kjkumar 2007-05-24 16:24:50 (378 views)

brake and temp gauge problem... help needed - jarni2 2007-05-12 01:57:21 (542 views)
- Re: brake and temp gauge problem... help needed - cwsixer 2007-05-24 01:38:01 (490 views)
  - Re: brake and temp gauge problem... help needed - jarni2 2007-08-03 13:12:31 (355 views)
    - E31 850 or E32 750 master would work and it's larger so it will give more brakin - bmw635 2007-08-03 13:20:00 (372 views)
      - Hello, The problem with brakes is still here.... - jarni2 2007-08-13 10:44:29 (341 views)
        
        Re: Hello, The problem with brakes is still here.... - jarni2 2007-08-13 10:51:28 (354 views)
        
        Don't know the problem you're having so post this on E23 forum as there's lot - bmw635 2007-08-15 15:32:49 (363 views)
        
        Re: Don't know the problem you're having so post this on E23 forum as there's lo - jarni2 2007-08-26 15:55:07 (335 views)
        
        Not sure if those are problems! Here's why: - bmw635 2007-08-26 19:18:40 (330 views)
        
        Re: Not sure if those are problems! Here's why: - jarni2 2007-08-27 15:36:14 (335 views)
        Re: Not sure if those are problems! Here's why: - jarni2 2007-08-27 04:19:10 (312 views)
        
        You have to bleed the fluid 1st as the warning light might be triggered by no (url) - bmw635 2007-08-27 16:33:47 (317 views)
        
        Re: You have to bleed the fluid 1st as the warning light might be triggered by n - jarni2 2007-08-30 14:06:30 (331 views)
        
        Probably bad #5 (dist valve). The O-ring leak on the servo is related to power - bmw635 2007-08-30 18:24:46 (386 views)
        
        Re: Probably bad #5 (dist valve). The O-ring leak on the servo is related to pow - jarni2 2007-08-31 14:44:41 (295 views)
        
        Try to post without sign up? I think you can. (nt) - bmw635 2007-08-31 15:17:06 (308 views)
        
        Correction #5 (proportioning valve). (nt) - bmw635 2007-08-31 02:21:35 (308 views)
- Temp gauge is probably bad circuit on SI board as battery leaks may have ate the - bmw635 2007-05-12 04:28:40 (479 views)
  - Re: Temp gauge is probably bad circuit on SI board as battery leaks may have ate the - jarni2 2007-05-12 07:35:05 (494 views)
    - Don't know about the brake then! Where's PS leak? Do you want to fix it? - bmw635 2007-05-12 13:24:47 (478 views)
      - Re: Don't know about the brake then! Where's PS leak? Do you want to fix it? - jarni2 2007-05-12 14:57:44 (445 views)
        
        E32, E34, E23, E28 use the same pump as E24, but double chak on RealOEM- @ $20 - bmw635 2007-05-12 19:18:45 (502 views)
        
        Re: E32, E34, E23, E28 use the same pump as E24, but double chak on RealOEM- @ $20 - jarni2 2007-05-13 13:04:53 (453 views)
        
        The red light flash on dash is bad bomb- use a pointed chisel to tap on the - bmw635 2007-05-14 02:02:18 (475 views)
      - Re: Don't know about the brake then! Where's PS leak? Do you want to fix it? - jarni2 2007-05-12 14:57:43 (447 views)

Steering creak. Need advice. - yooper 2007-08-15 09:21:55 (595 views)
- Creak like steering component's squeal or PS pump whine? (nt) - bmw635 2007-08-30 18:18:34 (603 views)
- Re: Steering creak. Need advice. - kjkumar 2007-08-30 17:28:08 (742 views)
- Sorry - wrong board (nt) - yooper 2007-08-15 12:36:23 (478 views)

Brand New Korman Spec BARE Cylinder Heads For M30 and M106 - Draleu 2007-08-16 13:40:18 (481 views)

1983 633CSi Not Getting Spark On Cool Mornings - drseth 2007-08-05 21:26:24 (456 views)
- Green box is Idle Control Module. Check cold start valve - CUPDGRA 2007-08-08 18:04:45 (486 views)
- Condensation/ moisture in the in the cap? Got electtric to coil but not plugs so - bmw635 2007-08-06 02:13:46 (413 views)

M30 Headers - downernsp 2007-08-02 16:27:24 (718 views)

My '89 is running hot. - samer0214 2007-07-29 01:26:03 (497 views)
- Re: My '89 is running hot. - downernsp 2007-08-02 16:20:52 (440 views)
- 2 options: 78C or 75C T-stat instead of 82C. Lower dual temp thermal sensor on - bmw635 2007-07-30 00:39:39 (421 views)

SI bd speedo & cruise control success!! - M.Rad. 2007-07-31 22:37:18 (537 views)
- Almost all E24/ E28 has this problem in it's life. There are SI boards on Ebay - bmw635 2007-08-01 00:36:40 (500 views)
  - Yeah, but now I can spend $150 on something else! (nt) - M.Rad. 2007-08-01 11:29:10 (468 views)

spotted nice E24 for sale - underdog 2007-07-04 21:00:07 (547 views)
- I'm looking fo one - layne 2007-07-28 11:10:13 (404 views)

E24-E28 - daka 2007-07-18 19:44:10 (505 views)
- Basically a 6er is a 5 series with a 7 series...... - CUPDGRA 2007-07-19 09:50:35 (588 views)
  - I kinda thought the 6er was a heavier, more sluggish sexier 535 - kff 2007-07-20 23:37:03 (579 views)

E24 Tshirts... (pic) (url) - merc63 2007-06-01 09:35:41 (908 views)
- Re: E24 Tshirts... - daka 2007-07-16 12:31:25 (412 views)
- Why don't you pay as a sponsor since you are making money for the advertising! (nt) - LJBimmers 2007-06-01 19:03:47 (476 views)
  - because I only make a couple dollars off of the shirts as is, and - merc63 2007-06-04 11:01:48 (412 views)
- Nice Shirts, but why no Paypal??!! - CUPDGRA 2007-06-01 09:53:20 (474 views)
  - I dunno why CafePress doesn't use it. - merc63 2007-06-01 10:10:58 (449 views)

New Member from PA (pic) - jbd5015 2007-06-08 16:58:48 (805 views)
- Re: New Member from PA (interior) - daka 2007-07-16 12:15:24 (414 views)
- Sport seat and fancy steering wheel. - kff 2007-06-08 22:28:50 (593 views)
  - Re: Sport seat and fancy steering wheel. - jbd5015 2007-06-09 09:37:14 (554 views)

HELP!!! CHECK LIGHTS STAY ON - thelastsumurai 2007-07-14 13:21:21 (498 views)
- Re: HELP!!! CHECK LIGHTS STAY ON - thelastsumurai 2007-07-14 15:02:19 (443 views)

question about brakes - thegreendragonfly 2007-07-11 20:39:52 (382 views)
- E31/E32 850 &750 front brakes, E34 540 rear brakes, E32 750 & E31 850 brake - bmw635 2007-07-12 12:17:23 (427 views)

HELP!!! - thelastsumurai 2007-05-20 12:34:50 (550 views)
- Re: HELP!!! - thelastsumurai 2007-05-24 11:12:43 (522 views)
  - HELP!!! PLEASE READ THIS!!!!!!! - thelastsumurai 2007-07-08 11:39:21 (439 views)
    - Then what ever is lit indicate problem with that part/ component- Fix it! (nt) - bmw635 2007-07-09 00:25:32 (430 views)
  - What fault lights stay on? - cwsixer 2007-05-24 21:44:14 (480 views)
  - That's normal to go out after awhile. If it stays on, it's warning you - bmw635 2007-05-24 15:48:01 (515 views)
- Re: HELP!!! - cwsixer 2007-05-24 01:19:59 (543 views)
- Did the battery melted/ corroded the PCB traces? Did you follow (url) - bmw635 2007-05-22 11:19:57 (509 views)

engine identification - help PLEASE ! - jarni2 2007-06-21 01:40:57 (668 views)
- Got pics of engine? The M90 has metal oil can vs alum on M30. - bmw635 2007-06-21 01:49:51 (675 views)
  - Re: Got pics of engine? The M90 has metal oil can vs alum on M30. - jarni2 2007-06-21 09:49:51 (1270 views)
    - It's the round cast with 8x between the # 1 & 2 from the left- should be - bmw635 2007-06-21 14:18:41 (642 views)
      - Re: It's the round cast with 8x between the # 1 & 2 from the left- should be - jarni2 2007-06-21 15:09:50 (572 views)
        
        Sounds like your TURBO head replaced the orignal head since they were - bmw635 2007-06-21 15:42:54 (626 views)
        
        Re: Sounds like your TURBO head replaced the orignal head since they were (pic) - jarni2 2007-06-30 15:59:24 (754 views)
        
        It's not M90, but a M30 high compression with possibly wrong head from (pic) (url) - bmw635 2007-07-01 02:57:14 (786 views)
        
        Re: It's not M90, but a M30 high compression with possibly wrong head from - jarni2 2007-07-01 05:01:46 (581 views)
        
        There were 2 Alpina verion: true Alpina cars and cars that owner added - bmw635 2007-07-01 16:28:04 (601 views)
        
        Re: There were 2 Alpina verion: true Alpina cars and cars that owner added - jarni2 2007-07-03 13:36:42 (583 views)
        
        Install the oil temp and pressure gauge on the rear of the head where - bmw635 2007-07-03 17:43:28 (539 views)
        
        Install the oil temp and pressure SENSOR..................... (nt) - bmw635 2007-07-03 17:44:44 (599 views)
      - Head cast MY pic; (pic) - bmw635 2007-06-21 14:19:40 (781 views)
  - Re: Got pics of engine? The M90 has metal oil can vs alum on M30. - jarni2 2007-06-21 03:30:04 (604 views)

diff gears - mbz1 2007-06-08 22:57:15 (510 views)
- Re: diff gears - jbd5015 2007-06-09 09:57:16 (469 views)
  - Re: diff gears - mbz1 2007-06-15 22:17:20 (387 views)
    - Upgrade to 5spd with matching drive shaft, it'll drop to 2500-3000rpm @ 80mph. (nt) - bmw635 2007-06-16 01:03:19 (403 views)
      - Re: Upgrade to 5spd with matching drive shaft, it'll drop to 2500-3000rpm @ 80mp - mbz1 2007-06-16 21:40:28 (416 views)
        
        The more reason to do it! Just need to get flywheel , clutch kit, pilot bearing, - bmw635 2007-06-17 03:04:28 (439 views)

85' 635CSi on it's way out the door! - jklnhyde 2007-06-06 12:23:33 (637 views)
- Re: 85' 635CSi on it's way out the door! (pic) - jklnhyde 2007-06-08 17:53:22 (876 views)

Will spend more time on this board. (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 23:02:10 (774 views)
- Nice looking shark. Glad to see you here. - kff 2007-06-06 10:01:08 (407 views)
- You will find a lot of R*F* refuges here..... js (nt) - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-05-30 11:16:09 (403 views)
- Glad to see you here! (nt) - DavidC 2007-05-29 18:11:45 (391 views)

E24 650 at speed video. (vid) (url) - bmw635 2007-06-01 12:38:05 (621 views)
- Old M6 vs new M6 video. (vid) (url) - bmw635 2007-06-01 12:43:08 (607 views)

e24/635CSi-1987/ Production date 09/1986-Autotran - kjkumar 2007-05-27 22:02:05 (492 views)
- There's a write up for SI battery replacement, SI board fix on here (url) - bmw635 2007-05-27 22:23:37 (517 views)
  - Re: There's a write up for SI battery replacement, SI board fix on here - kjkumar 2007-05-28 18:46:57 (480 views)

Question: My trunk accuator ONLY LOCKS and (pic) - Ken Mc Lean - 85 635CSi 2007-05-27 22:44:05 (479 views)

How do you bleed coolant system? - mbw635 2007-05-26 15:24:56 (518 views)
- Search here for bleed instruction. (url) - bmw635 2007-05-27 22:30:36 (505 views)

odd brake question - dr750 2007-05-27 08:44:16 (411 views)
- E23 chassis/ brakes/ suspensions is different from E24/ E28. - bmw635 2007-05-27 22:21:59 (421 views)

Which oils do you use for your e24 635csi ? - jarni2 2007-05-08 16:14:01 (461 views)
- I use plain dino oil (Castrol 10W40) in my M30 engine ('86 735i). (pic) - DavidC 2007-05-15 03:19:09 (558 views)
- Mobil 1 Synthetic for engine, Redline MT fluid for 5spd, Synthetic diff fluid is - bmw635 2007-05-08 20:48:26 (472 views)
  - Exactly the same for me also (pic) - kpmclean 2007-05-14 17:58:15 (523 views)
    - Re: Exactly the same for me also (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 22:32:40 (455 views)

635 tailight lense - winthropmass 2007-05-23 19:50:54 (472 views)
- Re: 635 tailight lense (pic) - Ken Mc Lean - 85 635CSi 2007-05-26 22:24:04 (585 views)
- Re: 635 tailight lense - thelastsumurai 2007-05-24 11:29:36 (488 views)

Nice Badge (nt) - Ken Mc Lean - 85 635CSi 2007-05-26 22:03:18 (438 views)

interior temp sensor missing... can I use one from... - jarni2 2007-05-24 12:06:17 (482 views)
- Re: interior temp sensor missing... can I use one from... (url) - cwsixer 2007-05-24 21:53:58 (508 views)
  - Re: interior temp sensor missing... can I use one from... - jarni2 2007-05-25 01:32:21 (471 views)
- Should be be OK based on design principle but I haven't tried it. (nt) - bmw635 2007-05-24 15:49:22 (479 views)

Ground up restoration on 635 (url) - bmw635 2007-04-22 23:25:37 (1322 views)
- Re: Ground up restoration on 635 - thelastsumurai 2007-05-24 11:23:51 (462 views)
  - This guy- spent over $25k so far and no end insight. (url) - bmw635 2007-05-25 00:25:46 (525 views)

rough idling e24 - ram635csi 2007-05-07 18:18:41 (537 views)
- Re: rough idling e24 (pic) - cwsixer 2007-05-24 01:01:20 (519 views)
- Try replace that sensor since heat/ age could chapped that wire. It's rare that - bmw635 2007-05-08 02:12:33 (508 views)

Fast and rough idle!! - sdesouza1311 2007-04-15 16:53:08 (611 views)
- Re: Fast and rough idle!! - sharkluver 2007-05-07 23:07:09 (521 views)
- Re: Fast and rough idle!! (url) - cwsixer 2007-05-02 19:17:51 (524 views)
  - Base on that link, it's not OEM idle control valve since it might be - bmw635 2007-05-03 01:51:39 (624 views)
- (1)Check for intake leak from air box to engine. (2) Clean idle control valve. (url) - bmw635 2007-04-15 22:01:32 (613 views)
  - Still running fast!! - sdesouza1311 2007-04-27 15:23:20 (447 views)
    - Re: Still running fast!! (pic) - sdesouza1311 2007-04-27 15:32:06 (599 views)
      - That looks like an EGR mod- never seen 1 in E24 before. - bmw635 2007-04-28 03:01:31 (505 views)
        
        Always fast - sdesouza1311 2007-04-28 10:38:54 (488 views)
        
        Use pictured idle control valve and set up the vacumm system like the link (pic) (url) - bmw635 2007-04-28 18:14:33 (1970 views)
        
        thanks I have now got another problem - sdesouza1311 2007-05-16 18:05:20 (464 views)
        
        How / what did you fix the odd ICV system? Sounds like there's a - bmw635 2007-05-17 03:03:04 (496 views)

I'm gonna get 6er stuff cause there are a few here that - kff 2007-05-07 22:39:43 (418 views)

FS BMW Factory Workshop Manual Set - xaviero 2007-04-19 14:45:23 (538 views)
- BMW Manual Set has been sold. - xaviero 2007-05-07 21:48:20 (410 views)

Woow, minty! (url) - bmw635 2007-05-01 03:02:47 (504 views)

Polish center with black wrinkle paint. (pic) - bmw635 2007-04-28 03:13:52 (691 views)
- looks good (nt) - kff 2007-04-28 19:04:04 (384 views)

Bimmer Fest - downernsp 2007-04-25 19:55:06 (452 views)

633 csi 5 speed shifter rattles - pmtre 2007-04-23 20:18:07 (463 views)
- Re: 633 csi 5 speed shifter rattles - pmtre 2007-04-25 09:15:48 (353 views)
  - Probably worn bushing in the shifter linkage. Check these: (pic) - bmw635 2007-04-25 14:05:44 (487 views)
- Rattles like loose bushing or gear grinding from synchros? (nt) - bmw635 2007-04-24 13:08:21 (398 views)
  - Re: Rattles like loose bushing or gear grinding from synchros? - pmtre 2007-04-25 18:57:23 (358 views)

Day 2 of SESF @ Biltmore Est. (pic) - bmw635 2007-04-22 02:53:07 (504 views)
- Nice get together. I was at the fest last year and Ron - kff 2007-04-22 20:33:43 (391 views)
  - Ha, SESF vet! Small world- I started the SoCal SharkFest in 1999/2000 then the - bmw635 2007-04-22 23:01:45 (421 views)

pics from Putnam Park (pic) - thegreendragonfly 2007-04-21 11:17:07 (497 views)
- Tammer was at that school in his new street/track car - kff 2007-04-21 12:39:14 (327 views)

Front Bilstein shocks are gone... need help with finding others - jarni2 2007-04-19 12:19:30 (406 views)
- E24 & E28 chasis share same mechanicals( engine, suspensions,drive line, etc..) - bmw635 2007-04-19 13:28:02 (387 views)

E24 Engine info & specs (url) - bmw635 2007-04-10 19:47:21 (515 views)